1、 [overview]

AP electromagnetic self-made safety brake (i.e. electromagnetic failure safety brake) is widely used in large and medium-sized cranes, port loading and unloading machinery and construction machinery

Hoisting mechanism, mine hoist, winch, belt conveyor, cable car and other driving mechanisms, especially casting crane and other cranes

The safety brake of the low-speed shaft is used for emergency safety when its working brake fails or the transmission system such as transmission shaft and gear fails

Full braking can realize flexible braking without hydraulic station.

2、 [conditions of use]

Ambient temperature: - 20 ℃ ~ 60 ℃

Relative air humidity: ≤ 90%

Controller input voltage: AC380V ± 10%

Protective cover shall be installed for use in open air or dust environment

3、 [working method]

Power on and release the switch, power off and switch on.

4、 [product model and meaning]

Ap330 / 30 braking force 330kn, 30mm behind the brake disc

5、 Installation position, angle and installation direction of AP safety brake

The AP safety brake must be installed on the brake disc of the drum at the low speed end of the equipment. Small port end of AP safety brake,

It must face the rotation direction of the brake disc when the hook is down, with an angle of 0-90 degrees.