Supplier Homepage Motor Motor Three-phase motor Hammernaco end meshing harmonic actuator fha-40c-100-e250

Hammernaco end meshing harmonic actuator fha-40c-100-e250 pictures & photos

Hammernaco end meshing harmonic actuator fha-40c-100-e250

Purchase Qty. / Reference FOB Price
1 piece	US $4580
20 piece	US $4280

Production Capacity:	15000
Payment Terms:

Send Inquiry

Basic Info

Product Description

The tooth surface on the opposite side is on a gear, and the right tooth surface and the left tooth surface are called opposite teeth.

A tooth surface on a gear tooth that meshes with the teeth of a mating gear and transmits motion.

Non working tooth surface the tooth surface on the opposite side of the working tooth surface.

Meshing surface in the gear pair, hamenaco's end face engages two meshing tooth surfaces of harmonic actuator fha-40c-100-e250, which are called meshing surface.

The effective tooth surface is an area on the tooth surface. During the meshing process of the gear, its tooth surface is in contact with the tooth surface of the mating gear in this area. The effective tooth surface area of hammernaco end meshing harmonic actuator fha-40c-100-e250 is directly affected by the relative position of the two gears during operation. The Zui large value of its area is the available tooth surface area.

The part of the tooth surface contained by the tooth top surface located at the top of the tooth. For the external gear, it is a surface on the gear tooth Zui far from the gear axis, and for the internal gear, it is a surface Zui close to the axis.

The bottom surface of the tooth groove (groove bottom) is located at the bottom of the tooth groove, which is included by the tooth root surface of hamenaco end meshing harmonic actuator fha-40c-100-e250 and connected with the tooth root transition surface. In some cases, the 'undercut' may be just a line.

A section between teeth cut by a given curved surface intersecting the tooth line.

The end face tooth profile is on the cylindrical gear and cylindrical worm. The section of the tooth surface of hamenaco end face meshing harmonic actuator fha-40c-100-e250 cut by the end plane is called the end face tooth profile.

The end meshing line (meshing line) is parallel to any pair of meshing end teeth in the shaft sensing column gear pair

In the whole meshing process, the motion track of its instantaneous contact point on the end plane is called the end face meshing line.