SIMATIC design power supply
SIMATIC S7 series excellent matching power supply. In terms of design and functionality, SIMATIC power supply design is an excellent choice for corresponding PLC systems. Its power reserve and voltage range fully meet the requirements of the corresponding controller. In addition, their installation base is also the same. This ensures that the SIMATIC design power supply is effectively matched with the controller and I/O modules. In addition to the SIMATIC PLC system, the SIMATIC design power supply can also provide reliable 24V power supply for other electrical equipment.
All components are effectively matched: power supply, controller, and IO system
The SITOP power supply in the form of SIMATIC design can reliably provide 24V voltage for many SIMATIC systems, from controllers SIMATIC S7-300, S7-1200, and S7-1500 to IO systems SIMATIC ET 200M, ET 200MP, ET 200pro, and ET 200SP.
Preferred partners in terms of design, functionality, and installation methods
SIMATIC design power supply can effectively integrate into PLC systems. In addition to supplying power to controllers and IO systems, they can also provide reliable 24V DC for other loads. Rich certification and wide temperature range allow power supplies, controllers, and I/O components to be combined in almost all areas. Of particular note, the SIMATIC design power supply has undergone complete system testing along with the corresponding SIMATIC controller.
SITOP SIMATIC design power supply:
1. Single phase, DC 24 V, suitable for S7-300 and ET200M
2. Single phase, DC 24 V, suitable for S7-1200
3. Single phase, DC 24 V, suitable for S7-1500 and ET200MP
4. Single phase, DC 24 V, suitable for SIMATIC ET 200SP
5. Three phase, DC 24 V, suitable for SIMATIC ET200pro, IP67
Single phase SITOP PS307 power supply suitable for SIMATIC S7-300 and SIMATIC ET200M
The PS307 power supply suitable for SIMATIC S7-300 and SIMATIC ET200M can be directly installed on the S7 rail and takes up very little space, and can automatically switch between 120/230 V AC inputs. The supply scope includes a comb connector that can be quickly connected to the CPU. With the help of an optional adapter component, the power supply can also be installed on a DIN rail.
Single phase SITOP power supply suitable for SIMATIC S7-1200
The compact PM1207 power supply compatible with SIMATIC S7-1200 is only 70mm wide and occupies very little space inside the cabinet, making it suitable for use with small PLCs. The automatic range switching function of DIN rail mounted 24 V DC/2.5 A power supply ensures smooth connection to the single-phase 120/230 V AC power grid in industrial or residential areas. This power supply can be installed on DIN rails or with screws.
A three-phase SITOP power supply suitable for SIMATIC ET200pro
The SIMATIC ET200pro PS power supply with a protection level of IP67 is used to provide load voltage for I/O modules and on-site actuators/sensors. It has a signal contact to indicate whether the 24V voltage is normal and whether overheating has occurred, as well as a secondary connector for connecting to the input voltage.
Single phase SITOP power supply suitable for SIMATIC S7-1500 and SIMATIC ET200MP
The width of the PM1507 power module is only 50 or 75 mm, making it suitable as the preferred load power supply for SIMATIC S7-1500 and SIMATIC ET200MP. They can be directly installed on the S7-1500 system rack without any side clearance from other modules. These power sources can automatically switch between single-phase 120/230 V AC systems. If more electricity is needed, such as when a larger starting current is required, the short-term overload capacity can provide 50% "additional power" every 5 seconds.
A three-phase SITOP power supply suitable for SIMATIC ET200pro
The SIMATIC ET200pro PS power supply with a protection level of IP67 is used to provide load voltage for I/O modules and on-site actuators/sensors. It has a signal contact to indicate whether the 24V voltage is normal and whether overheating has occurred, as well as a secondary connector for connecting to the input voltage.
Single phase SITOP power supply suitable for SIMATIC ET 200SP
These single-phase power supplies can be used as preferred load power sources for distributed I/O devices SIMATIC ET 200SP. Due to their ultra flat design, these power supplies are suitable for installation in control cabinets with a depth of 80 mm. They are equipped with built-in current monitors, running indicator lights, and signal contacts to indicate whether the output voltage is normal, making them suitable for energy management and diagnostic functions in factories. In addition, equipped with an independent switch that can turn on and off the 24V output, and can adjust the voltage range to compensate for the voltage drop caused by long cables, it is easy to debug and maintain.