Supplier Homepage Reducer / gearbox Harmonic reducer Combined type harmonic reducer Hamenaco flexo engagement harmonic CSD-32-100-2UH

Hamenaco flexo engagement harmonic CSD-32-100-2UH pictures & photos

Hamenaco flexo engagement harmonic CSD-32-100-2UH

Purchase Qty. / Reference FOB Price
1 piece	US $1380
10 piece	US $1200

Production Capacity:	15000
Payment Terms:

Send Inquiry

Basic Info

Product Description

Hamenaco flexo meshing harmonic CSD-32-100-2UH produces radial elastic deformation of flexo wheel with external teeth and a wave generator mounted inside the flexo wheel in an oval shape with flexible rolling bearings on the outer ring.

Then take off the measuring block clamp, mount the measured gear can begin to measure. When measuring, note that the right measuring claw should not touch the root of the tooth, and the left measuring claw should avoid the tip of the tooth trimming part; When measuring helical gears, the arch frame is used to measure the normal direction of the teeth.

The set of all errors on each working surface of a gear is called the gear global error Hameenako flexo mesh harmonic CSD-32-100-2UH (also known as the total error). The gear overall error curve is recorded in the form of error curve.

Gear integral error measurement technology is developed on the basis of tooth profile error measurement and single side meshing measurement. Basic measuring principle of gear integrated error measuring instrument is equivalent to the tooth shape error hammer naco soft gear harmonic CSD - 32-100-2 uh increased on the measuring instrument measuring deviation of base pitch device, will each teeth on the gear tooth profile deviation and base pitch deviation were measured by teeth, and the two deviations in a unified coordinate system in mesh order overlap, Thus, the overall error of the measured gear is obtained.

1. Single-sided intermeshing tooth measurement method

In single-side meshing measurement, as the coincidence degree between the measured gear and the measuring element, namely, csD-32-100-2UH bar of the measuring harmonics of the Hamenako flexure, is greater than 1, the latter tooth surface has engaged before the first tooth surface is measured, and the errors of the two adjacent same-side tooth surfaces will be superimposed together in the overlapping meshing part. Therefore, it is impossible to accurately read the single errors from the single - side meshing error curve.

If the measuring worm is replaced by the meshing harmonic CSD-32-100-2UH of the jumping multi-head worm hamenaco flexure wheel, and the measuring method of intertooth is adopted to make the measuring coincidence less than 1, the whole gear error can be measured continuously on a single rodent