Supplier Homepage Reducer / gearbox Harmonic reducer Combined type harmonic reducer Hamenaco harmonic Drive SHG-58-100-2UH

Hamenaco harmonic Drive SHG-58-100-2UH pictures & photos

Hamenaco harmonic Drive SHG-58-100-2UH

Purchase Qty. / Reference FOB Price
1 piece	US $3680
20 piece	US $3480

Production Capacity:	15000
Payment Terms:

Send Inquiry

Basic Info

Product Description

Hamenaco Harmonic SHG-58-100-2UH produces radial elastic deformation with an outer tooth flexion wheel and a wave generator mounted inside the flexion wheel in an oval shape with a flexible rolling bearing on the outer ring. Therefore, it has a great influence on the wear, so the cutting speed is the influence of the knife

The main factor of durability. In order to reasonably determine the durability of the *, the durability and cutting must first be determined

Velocity. In the experiment, other cutting conditions were fixed, and Hamenaco harmonic SHG-58-100-2UH was used to carry out * wear tests at different cutting speeds within the range of commonly used cutting speeds, and a set of * wear curves were obtained, as shown in the figure. Select * after the blunt standard, in each wear curve according to the specified blunt standard VB to find the corresponding knife in various cutting speeds

With durability}1, claw, T3.

5. 4* Choice of durability

From the above analysis, it can be seen that the cutting dosage is closely related to the * durability. Hamenaco Harmonic SHG-58-100-2UH If the durability is too high, cut

Cutting costs are bound to be limited to very low levels, resulting in increased cutting time. Although the consumption of * and its cost are less, but

Too low processing efficiency will also make the economic effect becomes very poor. Hamenaco harmonic SHG-58-100-2UH if the durability is too low, although can improve the cutting dosage, reduce the cutting time, but due to the accelerated wear of the tool loading, unloading blade grinding time and adjustment of machine tool time and cost significantly increased, productivity will decline. There are two different principles to determine the * durability in production. The * durability is determined by the number of workpiece processed per unit time, or by the principle of less production time consumed in processing each part, which is called the large productivity durability

; With the principle of low processing cost per product or process to determine the maximum durability,

Called low cost durability T.

Durability is usually determined based on low cost, when the task is urgent or there is an unbalanced weak link in production

When, the use of high productivity durability.