Important functions: → tensile test, compression test, bending test, torsion test, Shear test, mechanical properties test and research of all kinds of metal, nonmetal and composite materials at room temperature. Thin Plate, plate, strip, foil, flat, wire, Bar, section, tube, sheet, square, round, rectangle, ring, cast iron, cast iron non-ferrous alloy, segment, proportion (Ratio Coefficient k = 11.3 or 5.65) , non-proportion, full wall thickness Longitudinal section, full wall thickness transverse section, rectangular cross section and circular cross section. Property Test of various thin metal, wire, fine wire, fiber, elastomer and foam materials. Textile, food, medicine, cosmetic, rubber, plastic, film, Biological Material Performance Test. Pull-off, peel-off and welding strength test of electronic components. Peeling, bending strength and fastener performance test of printed circuit board. → tensile test of wood products, paper products and film samples. → stress relaxation test and bond strength test.

1 Maximum Test Force 1 KN ~ 2030kn/500kn/100kN 2 test machine class 0.5/1 Class 3 load measuring range 0.4% ~ 100% FS (0.5 class)/1% ~ 100% FS (1 class)4 indication relative error ± 0.5% (0.5 class)/± 1.0% within (1 class)5 test force resolution 1/± 30000000 FS (same overall resolution)6 deformation measuring range 0.2% ~ 100% FS 7 force control rate adjustment range 0.005% ~ 5% FS/s 8 force control rate control accuracy, when the rate is less than 0.05% fs, it is within ± 1% ; when the rate is more than 0.05% fs, it is within ± 0.5% ; when the rate is less than 0.05% fs, it is within ± 1% ; When the rate is more than 0.05% fs/s, it is within ± 0.5% of the set value, and the 11 displacement rate adjustment range is 0.001 ~ 600mm/min (customizable 2m/min & 80in/min ~ 25M/MIN & 1000in/min high speed testing machine system) . The 12 displacement rate control precision is within ± 0.2% of the set value 13 constant force, constant deformation, constant displacement control range 0.5% ~ 100% fs 14 constant force, constant deformation, constant displacement control accuracy, set value ≥10% fs, for set value within ± 0.5% of set value < 10% fs, 15 effective test span 410mm 410mm 510mm 16 cross beam moving stroke 0 ~ 1100mm 0 ~ 1100mm 0 ~ 1200mm 17 machine power 400W 750W 2000W