The perbance of high molecular weight polyethylene bar:
UHMWPE is the molecular weight of more than 400 million engineering thermoplastics.Has excellent wear resistance, good low temperature impact resistance, self-lubricating, non-toxic, water resistance, chemical resistance, heat resistance than normal PE, the outer surface hardness, rigidity
UHMWPE rod is generally translucent white appearance, the length of one meter, two meters in length can be customized, UPE rod diameter from 480 mm-300MM-200MM-100MM-80MM-50MM to 10 mm, other colors can be customized
The main characteristics of UHMWPE Rod UHMWPE ︰ average molecular weight of about 350 million to 800 million, due to high molecular weight plastic incomparable with other excellent impact resistance, abrasion resistance, self lubrication, chemical resistance and other properties.Moreover, UHMWPE low temperature perbance, at -40 ℃ still has a high impact strength, even at -269 ℃ for use.Abrasion resistance, chemical resistance, low coefficient of friction, flame-retardant anti-static, impact strength, ultra-low temperature perbance, long-term perbance and environmentally friendly non-toxic odorless and so have some requirement, the high is its first choice.
   Our development and production of wear-resistant ultra high molecular weight bar, impact strength, absorb shock impact, flame retardant, antistatic, self-lubricating, chemically resistant, shielding of atomic radiation, low temperature (-256 ℃), non-toxic, non-pollution characteristics, and has machining perbance.
   High molecular weight polyethylene Bangcaiyongtu widely used food machinery Lingjian blank, antiseptic equipment Deng Ling Jian
 Excellent physical and mechanical properties of UHMWPE makes it widely used in machinery, food machinery, textile machinery, paper, mining, agriculture, chemical industry and sports equipment and other fields
UHMWPE rod density 0.936 ~ 0.964g/cm3, non-toxic, water is not easy, not easy to adhere, no surface attrb; mechanical properties and unique chemical properties, which focused almost entirely on the merits of various plastics, together with the ordinaryethylene and other engineering plastics unmatched wear resistance, self lubrication and noise attenuation; impact resistance, low temperature, low temperature impact resistance; high temperature creep, good thermal stability, melting temperature of 190 ~ 210 ℃, heatdebation temperature of 85 ℃ (under the 0.46MPa), melt flow rate close to zero; cold is good, brittle at temperatures below 140 ℃; resistance to the tensile strength of up to 39.2MPa; corrosion resistance and good resistance to environmental cracking.

 
Wear and corrosion resistance of UHMWPE Rod
Even at low temperatures, high impact strength superior chemical resistance than thermoplastic low density (<1g/cm3) low water absorption, low coefficient of friction moderate mechanical strength, rigidity and resistance to creep excellent electrical insulation propertiesand anti-static (only for the original class material) excellent machining perbance good anti-high-energy radiation (gamma-and X-ray)
UPE has excellent wear rod and corrosion resistance, even at temperatures below -200 ℃, still has excellent impact strength.The main use areas: general mechanical components of food, and packaging machinery, wear parts, chemical and electroplating industries, refrigeration equipment, textile industry
Ultra-high molecular weight polyethylene (UHMW-PE) is a molecular weight higher than 450 million linear polyethylene, as a new engineering plastics, set in a variety of excellent perbance:
1. Wear the highest ranks of plastic, Teflon higher than nylon 66 and 4 times, 6 times higher than carbon steel;
2. Impact strength plastic in the first column, 2 times for the PC, ABS 5 times, and can at liquid nitrogen temperature (-196 ℃) under
Maintain a high toughness;
3. Self lubricating PTFE rather with the friction coefficient was only 0.07-0.11;
4. Impact energy absorption value in the highest value for all plastics, silencer works well;
5.UHMWPE bar very high chemical stability, in a certain range of temperature and concentration ability of various corrosive media and organic agents.
6. Anti-adhesion is very strong, second only to PTFE;
7.UHMWPE health bar compleby non-toxic, can be in contact with food and medicine, as food-grade plastic
High Molecular Weight Polyethylene UHMWPE bar
UHMWPE is a new engineering plastics, has many unique physical, mechanical and chemical properties, wear resistance than any other plastic, inert and has good physical impact resistance.Its biggest advantage is light weight, low energy consumption, good heat resistance, excellent electrical insulation properties, resistance to cracking and high resistance to repeated fatigue.In particular, impact resistance, wear resistance, chemical resistance, low friction coefficient, overall perbance impact energy absorbing plastic to the highest values ??known.
The emergence of ultra high molecular weight polyethylene plastic domestic and foreign experts have been generally considered the top ten scientific and technological achievements of the twentieth century

 
Ultra High Molecular Weight Polyethylene UHMWPE and characteristics of the perbance
Ultra-high molecular weight polyethylene (UHMWPE) referred to as ultra-high, usually refers to the viscosity average molecular weight greater than 1,700,000 to 7,000,000 of the polyethylene, high molecular weight polyethylene with relatively normal, with the molecular weight increased, especially after more than 1.7 million, but also shows its special superior mechanical properties, especially abrasion resistance, impact resistance, low coefficient of friction, chemical resistance, impact energy absorption of the comprehensive perbance and the general concern by domestic and foreign experts and application.In recent years, power plants, steel mills, mines, docks and other industries to gradually promote the use of the application to obtain a good result, in the context of a larger alternative to traditional stainless steel, high manganese steel, cast iron, bronze, nylon and other materials,has broad prospects for development.直径110毫米UHMWPE耐磨损塑料棒，外径110毫米UPE棒，外圆110毫米高分子量聚乙烯棒，超高分子棒直径110毫米，耐磨UPE棒直径110毫米-100毫米

超高分子聚乙烯板可做各种机械的零部件，包括食品机械的齿轮、蜗轮、蜗杆、轴承。化工中做泵、阀门

高分子量聚乙烯棒材的用途

耐磨材料，食品机械，

厂商直销直径50mm高分子聚乙烯棒料有图片，照片 有现货，一般产品规格有直径60mm-70mm-80mm-90mm-100mm长度在一米左右，买高分子聚乙烯棒到生产企业，加工企业，生产厂家-无锡精工尼龙棒厂是一家专业生产高分子聚乙烯棒材的生产企业。产品规格齐全，价格合理，材料品质高，质量好，是用百分之百高分子聚乙烯原料加工，不加任何添加剂，不加任何辅助材料，经高温挤出成型，高分子聚乙烯棒材产品特性：高耐磨，自润滑性能高，是塑料棒材中最耐磨损的塑料棒材，中文名高分子量聚乙烯棒材，英文为UHMWPE棒，高分子量聚乙烯棒材，厂商直销外径直径50毫米高分子量聚乙烯棒，分子量在500万以上的是高分子棒，超级耐磨Uhmwpe棒，有良好的耐低温性能，自润滑性能，无毒为食品级塑料棒，Upe棒材的分子量为500万，

如何识别高分子量聚乙烯棒，

1.从外表上看表面光滑，有滑度，细腻，有弹性，有光泽，有亮度，同时界面与外表一样，

2.高强度，UHMWPE棒强度比较高，

3，UHMWPE棒车加工时的丝条，不易断裂，

超高分子量聚乙烯棒直径50毫米长度1米现货供应商，销售商，UPE棒料单价，UPE棒产品规格、型号，价格，条款UHMWPE棒生产企业，加工厂，厂商，生产商，UHMWPE棒工厂，销售公司，高分子量聚乙烯棒料生产厂家，加工企业，加工商，百分之百保证材质纯超高分子量聚乙烯棒
高分子棒，高分子PE棒，高分子UPE棒，高分子RCH1000棒，高分子UHMWPE棒，高分子聚乙烯PE棒，高分子PE500棒，高分子PE100棒，PEHD1000高分子棒      保证分子量500万以上的高分子棒，  外圆60mmUHMWPE棒一支重量3公斤一支单价144元（长度为1000毫米）外圆60毫米UPE棒一支重量3公斤一支单价144元，高分子聚乙烯棒外径单位为毫米，如直径50，60，70毫米UPE棒，长度用米来计算，外圆60毫米U-PE塑料棒一支重量3公斤一支单价144元，白色UPE塑料棒，UHMWPE塑料棒，高分子聚乙烯塑料棒，超高分子聚乙烯塑料棒，高分子量塑料棒，    外圆60mm高分子量聚乙烯UHMWPE棒一支重量3公斤一支单价144元含税价，直径60mmUHMW-PE棒一支重量3公斤一支单价144元，高分子PE棒直径60毫米现货供应商，

高分子棒销售公司，工厂直销UHMWPE棒，UPE棒，厂家直供高分子聚乙烯棒，规格，型号，价目，价格，外径，外圆，直径，圆形UHMWPE棒，实心棒，棍，UHMWPE棍，棒子，高分子量聚乙烯棒材参数，图片照片 UHMWPE棒彩色图片，高分子聚乙，UHMWPE棒料原产地，高分子PE棒提供样品 最小订货量 高分子聚乙烯棒交货期现货供应商 供货能力 销售UHMWPE棒   质量认证UPE棒直径50毫米长度1米现货供应商，直径5厘米长度1米现货供应商，UHMWPE棒直径50毫米长度1米现货供应商，U-PE棒销售商，RCH1000棒生产商，供应商，销售商，PE-U棒材厂家，RCH1000棒直径50mm现货供应商，分子量800万的高分子量聚乙烯棒现货，PE1000棒，500万高分子聚乙烯棒，1000万分子量UPE棒白色PE1000棒，白色UHMWPE棒，如何识别高分子量聚乙烯棒，1.从外表上看表面光滑，有滑度，细腻，有弹性，有光泽，有亮度,目视方法:真正的超高分子量聚乙烯表面平整、均匀、光滑,发亮而且切面密度非常均匀,如果不是纯正的高分子量聚乙烯棒色泽暗淡而且密度不匀，同时界面与外表一样，2.高强度，UHMWPE棒强度比较高，3，UHMWPE棒车加工时的丝条，不易断裂，4，比重，高分子聚乙烯棒材的比重只有0.93，高纯度UHMWPE棒，纯白色高分子棒，型号，规格，照片，图片，直径50毫米一支重量=2.公斤，一支价格96元一支，直径50毫米UPE棒长度1米现货，直径50毫米UHMWPE棒材的分子量是500万，高分子聚乙烯棒国内品牌【精工】

高分子聚乙烯U-PE棒的性能：

超高分子聚乙烯是分子量高于400万的热塑性工程塑料。具有极好的耐磨性，良好的耐低温冲击性、自润滑性、无毒、耐水、耐化学药品性，耐热性优于一般PE，外表面硬度，刚性

超高分子聚乙烯棒外观一般为半透明白色,长度一米,可以定做二米长度,UPE棒直径从480毫米-300MM-200MM-100MM-80MM-50MM到10毫米,也可以定做其它颜色

UHMWPE棒的主要特性︰UHMWPE平均分子量约350万～800万，因分子量高而具有其它塑料无可比拟的优异的耐冲击、耐磨损、自润滑性、耐化学腐蚀等性能。而且，UHMWPE耐低温性能优异，在-40℃时仍具有较高的冲击强度，甚至可在-269℃下使用。 抗磨损性、抗化学腐蚀性、低摩擦系数、阻燃抗静电、冲击强度高、超低温使用性能、长期使用性能和环保型无毒无异味等有一定要求的场合，超高是其首选。

我公司开发生产的超高分子量棒材耐磨损、冲击强度高、吸收震动冲击、阻燃、抗静电、自润滑、耐化学腐蚀、屏蔽原子辐射、耐低温（-256℃）、无毒、无污染等特性，并且具有机加工性能。

超高分子量聚乙烯棒材用途广泛，可用于食品机械零件坯料，防腐设备等零件
UHMWPE优异的物理机械性能使它广泛应用于机械、食品机械、纺织机械、造纸、矿业、农业、化工及体育运动器械等领域

超高分子量聚乙烯棒材密度为0.936~0.964g/cm3，无毒、不易吸水、不易黏附、无表面吸引力；力学性能和化学性能独特，它几乎集中了各种塑料的优点，具有普通聚乙烯和其他工程塑料无可比拟的耐磨性、自润滑性和噪声衰减性；抗冲击、耐低温、抗低温冲击；耐高温蠕变、热稳定性好、熔点温度为190~210℃，热变形温度为85℃ (在0.46MPa下），熔体流动速率接近零；耐寒性好，脆化温度低于140℃;耐拉伸强度高达39.2MPa；耐腐蚀和耐环境开裂性能很好。

直径100毫米UPE棒厂商报价.现货价格.UPE棒生产商.供应商.销售商.UPE棒实心棒报价.100毫米圆形UHMWPE棒的价格.图片 照片 .UPE棒品牌.UHMWPE赛棒品牌价格.耐磨UPE棒外径100毫米.upe棒出口加工企业.UHMWPE棒出口生产企业.高分子聚乙烯棒加工生产企业.UHMWPE棒企业介绍.产品性能介绍.企业实心棒.柱.棍.无锡UPE棒.苏州UHMWPE棒.白色UPE棒.昆明UPE棒.昆山UHMWPE棒.高分子量聚乙烯棒.江苏UPE棒料.上海市UPE棒.耐磨UPE棒.上海周边地区UHMWPE棒生产商.销售商.上海市UHMWPE棒销售商.供应商.生产商.批发商.乌鲁木齐UPE棒.UHMWPE棒.高分子聚乙烯棒.西安UPE棒.UHMWPE棒.高分子棒..昆明UPE棒.白色UPE棒.高分子量聚乙烯棒.武汉UPE棒.UHMWPE棒.耐磨损U-PE棒产品图片
照片 超高分子量聚乙烯棒(UHMW-PE棒英文全称是ultra-high molecular weight polyethylene
pipe)简称UHMWPE棒或UPE棒
是由乙烯.丁二烯单体在催化剂的作用下.聚合而成的平均分子量大于500万的热塑性工程塑料棒.该材料是最耐磨的塑料棒.被称为"令人惊异"的工程塑料棒.超高分子量聚乙烯棒材的最大特性?是[耐磨]摩擦系数只有0.07,耐高温蠕变性.耐磨系数低.自润滑性能强.卓越的耐化学腐蚀性.抗疲劳性


塑料材料的耐磨性能是靠该材料的自润滑性能.并不是材料越硬越耐磨.自润滑性能强.耐磨越高.高分子聚乙烯UHMWPE棒是自润滑性能最好的塑料棒被称为"令人惊异"的塑料棒,

uhmwpe棒料的应用领域.具体用在那些方面?.提供全面的UHMWPE的参数.型号.图片.价格.厂家.生产企业.工厂直销高分子量聚乙烯棒材.棒料.U-PE棒,高分子量聚乙烯棒

UHMWPE塑料棒产品，性能，图片 照片 ，

110mmU-PE棒，江苏无锡市U-PE棒，UPE

棒，耐磨损UHMWPE塑料棒材