The BC Biomedical Model SA-2010S Series is a microprocessor-based electrical safety analyzer with a built-in patient simulator. It allows for a multitude of tests to be perbed on a device using the same unit and lead connections. It provides a full electrical safety analyzer, as well as ECG Simulation with four wavebs with constant QRS duration and six machine perbance testing wavebs. There is Patient Lead testing for 10 bs. SA-2010S Series Basic Features:
• Led status indicators • Audio feedback • Touch control keys – no knobs • 10 universal patient lead bs • High impact plastic case
Safety Analyzer Capabilities:
• Line voltage measurement • Device under test current measurement • Earth / ground lead resistance • Earth / ground leakage current • Enclosure / chassis leakage current • External resistance • External leakage current • Source receptacle wiring integrity monitor • True RMS measurements • AAMI ES1-1993 or IEC 601 selectable test loads • 90 to 264 VAC operation • Full 20 amp rating • Self test points • Externally replaceable ground fuse • Automatic load reversal delay • Patient lead to lead leakage current • Patient lead to earth / ground leakage current • Patient isolation leakage current • External isolation leakage current
Patient Simulator Capabilities:
• Sine: 10, 60 AND 100 HZ • ECG: 30, 60, 120 AND 240 BPM • Square: 0.125 AND 2.0 HZ • Triangle: 2 HZ • High level output (1 V p-p) • Amplitude accuracy: +/- 2% • Frequency accuracy: +/- 0.5% SA-2010S-R: