西门子CPU222CN继电器AC/DC/DC 6ES7212-1BB23-0XB0

 地址（ Add ）：上海市松江区弘翔路58号195

公司优势产品系列=西门子S7-200CN | S7-300PLC |  触摸屏 | 变频器 | 伺服电机 | 数控系统 | 总线电缆| 开关电源
CPU221 DC/DC/DC,6输入/4输出
CPU221 继电器输出,6输入/4输出
CPU222 DC/DC/DC,8输入/6输出
CPU222 继电器输出,8输入/6输出
CPU224 DC/DC/DC,14输入/10输出
CPU224 继电器输出,14输入/10输出
CPU224XP DC/DC/DC,14DI/10DO,2AI/1AO
CPU224XP 继电器输出,14DI/10DO,2AI/1AO
CPU226 DC/DC/DC,24输入/16输出
CPU226 继电器输出,24输入/16输出

CPU 221 installed are:

Integrated 24 V encoders/load power supply:
To directly connect the sensor and encoder. With 180 mA, it also can be used as the load power supply.
Two type:
Take a variety of power and control voltage
The built-in digital b/output:
Six b and four output.
A communication interface:
optional
As PPI interface, used for program function and HMI function (TD 200, OP), S7-200 internal CPU/CPU communication (9.6/19.2/187.5 KBPS), or from the stand as the MPI, used for MPI and standing (S7-300 /-400, OP, TD, button board) exchange data.
The user programmable interface (FreePort), take interrupting capacity, and the equipment used for Siemens serial data exchange, for example in the ASCII agreement, baud rate of 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2 Kbit/s, but will PC/PPI cable to use as RS 232 / RS 485 adapter.
Interrupt b:
The rise of process signal along or down to very high speed along the response
High-speed counter:
Four high-speed counter (30 kHz), but through the beter Settings make can and reset b, with two separate b, and used as increase/down to counter; Or can be connected with 90 ° 2 is incremental encoder.
The simulation device (optional) :
For integration of the b of simulation and the user program test.
Simulation potentiometer:
A simulation potentiometer, can be in daily work used as a set value counter, for example set time.
Pulse output:
2 a high-frequency pulse output (maximum 20 kHz);
Can be used for bing task, drive and frequency conversion motor stepping motor.
Real time clock (can be used as optional modules connected) :
For example used to give a message plus time mark, record the machine running time or used for the process control based on time.
EEPROM son module (option) :
Used to maintain integrity of STEP 7-Micro/WIN the user program and other documents.
Used to support data record function and bula management.
Allows fast modify the program (even if no programming device) and other program file.
Through the battery to provide a long time backup:
But will storage time increased to 200 days. Without the battery module, user data (such as the memory a state, data block, timer and counter) through the internal super capacitor protection, about 5 days. Can permanently kept the user program (free maintenance). Insert the battery module son memory slots in the module.