This machine can make the paddy into rice at one time, and it would finish the separation of chaff, broken rice as well. Shattered part can be used in crushing rice, corn, sorghum, beans, potato, stem and of beating. The moisture content and impurity of the processed material will directly influence rice and machine efficacy, load.by the way ,used for other role will result in the intended use of the machine and against.

Operating Instruction:
1, wiring requirements: this machine can"t use with the original lighting line , must be directly from the power supply switch with total four square millimeter above the copper wire or aluminums wire connection, cannot use plug seat, it is recommended to use more than 10 A knife switch.

2, operation methods: before starting the machine carefully check each part whether fasteners, become loose, and open the cove of the rice milling machine to inspectthe roller clearance is correct. General m a knife and meters reinforced the clearance between the tip of the roller is: grinding to locate the left and right sides, 3 mm steel reinforced end run around 2.5 millimeters.

 3, turn off the switch, standby idle operation 1-3 minutes, if works normally , and then startsthe processing. Open feeding plug-in boards, should slow take leave, make the machine gradually increase the load, or sudden increase, may make the machine jams .

Technical Parameters: