Transport Package
Blucking
Specification
200-10000BPH
200BPH to 10000BPH Halal Poultry Automatic Chicken Slaughtering Machine
QUALITY IS NO.1 Service better than price
| 1 | Slaughter transfer line | Chicken will be processed on this rail, it is main part for the main slaughter plant Production line.
The distance of hangers is 8inch.
Stainless steel chain, guide rails, stainless steel hooks, nylon hanger |
| 2 | Electric tunning machine | fiberglass reinforced plastic
reliable and stable electrical devices |
| 3 | Scalding machine | This machine is used to scald the carcass of the chicken to remove the feather easily;
Thickness of Board: 2mm,Upper Cover Thickness :1.2mm,Supporting Leg Thickness:2mm.
Temperature between 58C°-62C° of the water
use blower system and impact pressure system make to produce highly scalder results. |
| 4 | A Frame Primary Plucker | This plucker is dedicated device for chickens ,there are 4 main parts: Depilation, regulation section, guide part, spray part.
Principal part is stainless steel
Shape Size:3350*2350*2350
De-feather Machine consists of four boxes .Each line has 12 plates .Total 6 lines with 72plates. |
| 5 | Automatic cut head machine | this equipment use to auto cut the head on production line
Principal part is stainless steel |
| 6 | Automatic cut claw machine | this equipment use to auto cut the feet on production line
Principal part is stainless steel
this equipment use dedicated accurate chuck location had high quality feet |
| 7 | Unloading claws device | this equipment will be auto take off the feet from production line
All body is stainless steel |
| 8 | Drivng device | This machine is to run the whole hang rail
including: motor , reducer , brackets and other drive components
Power:2.2KW By inverter power, run more smoothly. |
| 9 | Frequency converter |
Frequency Controlling Box.
Stainless steel Box
3.7kw
|
| 10 | Tension device | To control the convey rail length and tight
Stainless steel structure |
| 11 | Spiral precooling machine | This device can replace the precooling line to precooling the chicken carcass
This machine used to low down the temperature of carcass to keep the carcass good-looking and keep fresh in the forward process.
The Thickness of the tank made of 3 stainless steel
Spiral Pushing Device is melted by 2mm thick stainless steel.
Power 5.2kw/set
ONE sets of Fan to make bubbles in the water in the tank efficiently so that improve cooling result and clean the carcass too
Buyer Also Need To Prepare cold Water Or A Piece Of Ice MachineBuyer prepare workspace |
Crate transfer washing
Crate washing conveyor is usd to wash crates in a poultry processing plant.This equipment uses high pressure water to flush dirt inside and outside crates,water inside machine cycles automatically to save water.Litters would be automatically excluded out of from the equipment by the filter drum to ensure long-term stable and reliable using.
Slaughter transfer line
Slaughter transfer line suits automated production request of poultry slaughtering , scalding and plucking . It"s made of control , it strictly meets commodity inspection and food hygiene standards as well.
Air blowing scalder
Air blowing scalder is applied in scalding procedure before poultry plucking, it is box shape construction, energy saving, using direct steam heating, water temperature and level is automati-cally controlled, air flow agitation, it can not only get perfect scalding performance but also meet different kinds of processing capacity requirement.
A shape plucker
The plucker is used to pluck the feather after scalding, it"s designed to corresponding numbers of working boxes and length to suit varies kinds poultries or processing capacity requirements, it gets perfect pluck performance without beak damage. The latest water proof and noise reduction design for bearing chamber brings the bearing long duration using.
The plucker has good feature suck as high pluck rate, low damage rate, low fault rate, easy operation and repair, easy and convenient adjust, high automatization and etc.
Eviscerated trans fer line
Eviscerated transfer line is used in poultry open and eviscerated processing procedure, it"s madeof stainless steel and nylon, fitted with variable frequency (speed) control, it strictly meets commodity inspection and food hy giene standards as well
Screw Pre-chiller is used in pre-chilling procedure after eviscerated. To get ideal chilled meat, the chiller is adopted in high pressure air flow agitation and screw blade push-ahead method to ensure the poultry was cleaned and chilled completely and evenly. The lengthis varies from corresponding processing capacity, can meet the commodity inspection and food hygiene standards.
Portioning transfer line
Portioning transfer line is used in poultry cutting-up procedure, it"s made of stainless steel and nylon, accompanied with variable frequency[speed] control, it strictly meets commodity Portioning transfer line inspection and food hy giene standards as well.
Welcome to contact us to buy more combination and collocation.
