Series:Control System

  Product Description

  The IS420YDOAS1B GE discrete output I/O module converts digital signals into analog signals to control external devices.

  Usage:

  Industrial automation control system

  Data collection system

  Test measurement system

  Communication system

  Medical equipment

  Product Description:

  The discrete output I/O package IS420YDOAS1B can provide electrical interfaces between up to two Ethernet input/output networks and discrete output terminal boards.This package can control up to 12 relays and receive feedback specific to the terminal board.All inputs of the I/O package will be sent through a dual Ethernet RJ454 connector and a three pin power input.The DC37 pin connector is used for output and is directly connected to the relevant terminal board connector.If visual diagnosis is required,it will be provided through the LED indicator light on the front of the packaging.

  As mentioned above,the IS420YDOAS1B I/O package can provide diagnostic LEDs;Usually,12 LEDs are yellow to indicate that the command is energizing each output of the relay.The BBPx processor LED will also be used to indicate the required diagnostics.The ATTN LED indicator light is red or green,constantly on or flashing.Some modes of green ATTN LED are 2 Hz 50%and two 4 Hz pulses every four seconds;The latter mode indicates that the application is online and running as needed.

  During the runtime of the IS420YDOAS1B package,various common diagnostic alerts may pop up,such as two,three,and five.All of these alarms have different causes and solutions.The description,causes,and possible solutions for alarm five are that the I/O package is in remote I/O mode,partly due to hardware failures and module configuration.To fix these errors,please completely replace the I/O package or module,or rebuild the system and reconfigure the I/O package.

  Product Description:

  The IS420YDOAS1B GE discrete output I/O module consists of the following components:

  Motherboard

  Power board

  Terminal board

  Product parameters:

  Output points:16

  Output type:Relay

  Output current:2 A

  Output voltage:24 VDC

  Product specifications:

  Dimensions:233 mm x 160 mm x 40 mm

  Weight:2 kg

  Application field:

  The IS420YDOAS1B GE discrete output I/O module is widely used in various industrial automation control fields,including:

  Electricity

  Oil and natural gas

  Chemical industry

  Metallurgy

  Water treatment

  Related products:

  IS420 series I/O modules

  GE Discrete Input I/O Module