Insulation And Varnish:
The insulation system is class H.
All wound components are impregnated with materials and processes designed specifically ensure the generator running in dreadful conditions. The special developed resin materials meet rotating components.

Windings and Electrical Performance:
All generator stators are wound to 2/3 pitch, This eliminates triple(3^rd,9^th,15^th…)harmonics on the voltage waveform and is an optimum designed for UPS equipment of non linear loads. The 2/3 pitch design avoids excessive neutral currents result from higher winding pitches. A fully consecutive damper winding reduces oscillations during paralleling. The 2/3 pitch windings and carefully pole and tooth ensures very low waveform distortion.

Terminals And Terminal Box:
Standard generators are 3-phase,and you can reconnect 12 ends of the terminals, which are mounted on a terminal block at the non-drive end of the generator. A sheet steel terminal box within AVR is provided with enough place for the customers"wiring. It has removable panels for easy access.

Telephone Influence Factor:
THF(BS EN60034-1)<2%
THF(NEMA MG1-22)<50

SHAFT AND KEY
All generator rotors are dynamically balanced to better than minimum vibration of BS6861: part1 grade 2.5 double bearings generators are banlanced with a half key.

ENGINE ADAPTOR AND COUPLING

All generators are designed two kinds of construction. The adaptor and the drive plate is consonant with SAE standard.

LEVELS Of PROTECTION

All generators are IP2 and IP23 and IP44 can be optional for aircool protected generator. but rated power will decrease 5~10%.
The Definition Of The Product Model:

REMARK

All the rated are on basis of environment temperature 40^#C, altitude not exceeding 1000m.

Different temperature offers different standby power, the define of standby power is  related to the standard of ISO8528-3.

All the rotors are 4 poles, as to other pole generator, please contact the manufacturer.

Generators in other voltage range depend on costumers request