3U-SZC系列失重秤

3U-SZC series of weightlessness scale

一、产品概述product introduction

失重秤采用静态计量结构、周期循环控制方式，具有极高的计量精度，广泛应用于玻璃、建材、水泥、塑料、冶炼、矿山、化工等行业。

Weightlessness scale using the static measurement structure, cycle control mode, the measurement accuracy is high, widely used in building material, glass, cement, plastic, bllurgy, mine, chemical industry etc..

二、工作原理Work principle

失重秤采用周期计量控制方式，设置好周期时间和周期重量，在周期内，首先通过上给料机向计量料斗进料，当进料大于设定重量时，停止进料，微机记录下现在的重量值，然后控制下给料机开始排料，当排料量接近设定重量时，改为慢速排料方式，直到等于设定重量，停止下给料机排料，等待周期结束后，进入下一个周期循环运行，因为计量时处于静态计量方式，所以有极高的计量精度。

Weightlessness scale using periodic measurement control mode, set up the cycle time and cycle of weight in the period, first through the feeder to the metering hopper feed, when the material is greater than the set weight, stop feeding, microcomputer recording now under the weight value, and then under the control of feeder began to discharge, when discharging quantity of close set the weight, to slow the discharging b, until it is equal to the set weight, stop feeder discharge, waiting for the end of cycle, into the next cycle of operation, as measured in static measurement mode, so the measurement precision.

三、技术指标Technical indicators

计量精度Measurement precision：≤ ±0.5%

产量范围Capacity range：0.01－60T/H  

计量方式Metering mode：静态Static

工作方式Working mode：断续或批次Intermittent or batches

四、系统特点System features

1、计量精度高，系统计量精度可达到0.5%。High measuring accuracy, the system measuring accuracy can reach 0.5%

2、密封效果好，给料机和计量料斗采用密封结构，很容易的实现密封结构Good sealing effect, feeder and hopper adopts sealing structure, easy to achieve sealing structure

3、标定简单，采用简单的砝码标定，即可达到很高的计量精度。Calibration is simple, the simple weight calibration, can achieve very high metering accuracy.

4运行稳定可靠，采用周期测零技术，彻底解决了称重信号的温漂和时漂，保证了长期计量精度。Stable and reliable operation, using periodic zero detection technology, compleby solve the weighing signal temperature drift and time drift, ensure a long measurement precision.

5、采用高精度的数字称重模块，数字传输技术，具有线路简单、无调节部件、分辨率高、信号无衰减、抗干扰强。

By using high precision digital weighing module, digital transmission technology, has the advantages of simple circuit, no adjustment parts, high resolution, no signal attenuation, no interference.

6、控制器采用触摸显示技术，中英文图形化显示，向导操作方式，操作简单，无需记忆。

The controller uses touch display technology，Chinese- English graphical display, guide mode of operation, operation simple, without memory.

7、可接485通讯，CAN通讯，DCS,PLC等接口。

It can connect 485 communications; CAN communication, DCS, PLC etc. interface.

8、采用GPRS无线数传功能，可以短信报表、远程诊断、校秤等功能。

Using the GPRS wireless data transmission function, can SMS report, remote diagnosis, remote control scales and other functions.