商品介绍：
·FDJ-120型风动切开锯适用于风险的作业环境，可在较高温的环境下作业，无火花，在湿润的环境中无漏电风险，是一款功能牢靠、安全型及效率极高的抱负风动东西之一。广泛用于采矿、石化、修建等职业。
·使用井下压风管道体系作为动力源。重量轻，易带着；构造科学，便于作业。 思礼镇FDJ-120/矿用防爆切割锯
·可迅速切开管道、电缆、角钢、构造钢、U型钢、链条、锚杆、锚索等。
·锢金属钢合金超级锯条，耐高温、耐冲突、运用寿数长。十分适用于锯割不锈钢、镍基合金、铁、铜、铝、玻璃、塑料、木材等。
 技术参数：

类型	功率	耗气量	切开厚度	切开宽度（直径）	锯片速度	重量
FDJ-120	0.5kw	0.6m3/min	三种锯片： 0—30mm 30—50mm 50—120mm	120mm	60m/min	6kg
FDJ-180	1.0kw	1.2m3/min		180mm	90m/min	10kg
FDJ-230	1.5kw	1.5m3/min		230mm	120m/min	16kg

首要切开范围：
·FDJ-120/220/230气动切开锯使用井下压风管道体系作为动力源。
·重量轻，易带着；构造科学，便于作业。
·可迅速切开管道、电缆、角钢、构造钢、U型钢、链条、锚杆、锚索等。
·锢金属钢合金超级锯条，耐高温、耐冲突、运用寿数长。
·广泛用于天然气、煤矿、石化、修建等职业。
气动风动切开锯运用方法：
1、知道所需切开的材料，如有必要可以通过降低空气压力来降低锯片的改变速度。 龙亭区FDJ-120矿用/风动切割锯
2、确保健壮固定了所需切开的材料，防止其移动。
3、气动空气马达时，用手指按压阀杆，然后初步切开。
4、用锯的重量来控制切开压力。对于较软的材料来说，这么的重量现已满意。过多的压力会降低锯片的速度。对于较硬的材料，可以通过加压的方法来降低锯片的改变速度。切开是坚持锯笔直。锯片的任何曲解或歪斜都可以降低其运用寿数。（留意：避开切开后可以坠落的碎片。切开即将结束时，切勿使锯碰到您的身体、工件或邻近的其它人员。）
5、封闭空气马达时，开释阀杆。
6、下次切开初步前，锯片有必要坚持运动情况。气动锯时，锯片不能接触任何表面。 偃师市FDJ-120/矿用防爆切割锯
7、断开空气软管时，封闭空气软管阀。断开前，先翻开空气阀给软管减压。
8、更换锯片前，有必要断开空气软管，并推动阀杆以开释掉马达内的压力。
9、顺时针改变调整手柄以便开释锯片导杆上的张力。然后开释侧面板的锁以便翻开侧面板。然后从驱动轮上取下锯片并将其从锯带导杆上松开。
留意事项：
一切动力东西都也许会十分风险。请遵循下列安全过程以便维护自己。
1、戴上护目镜、手套、安全靴和具有防护作用的厂服。
2、时间坚持脚下安稳、平衡。 许昌市矿用便携式/风动小型切割锯
3、医疗治疗、喝酒或服食药物后请勿操作本东西。
4、放置机器前，先关掉机器（封闭阀门）。
5、机器停止作业后，应立即切断气源供给，防止在无意识下发动机器。
6、请勿站在梯子上或靠在脚手架上操作本机。非必要作业人员请远离作业区。
7、操作发动东西钳，应先移除发动软管。关掉主气阀。要开释紧缩气体，则从头翻开手阀门。
8、双手紧握机器。坚持双手和身体的其它有些远离切开区。
9、运送机器前必须关掉马达并切断气源。
10、留意也许坠落的碎片。
 
Commodity introduction:
The FDJ-120 type pneumatic cutting saw is suitable for the risk working environment. It can operate in a high temperature environment, no sparks, and no leakage risk in humid environment. It is a reliable, safe and highly efficient aspiration pneumatic thing. It is widely used in mining, petrochemical, construction and other professions.
Use the downhole air pressure pipe system as a power source. The weight is light and easy to be carried; it is scientific and easy to work. Si Li Zhen FDJ-120/ mine explosion-proof cutting saw
The pipeline, cable, angle steel, structural steel, U type steel, chain, bolt, anchor cable and so on can be cut off quickly.
Super - Han bl steel alloy saw blade, high temperature resistance, long life, the use of conflict. It is very suitable for sawing stainless steel, nickel base alloy, iron, copper, aluminum, glass, plastic, wood and so on.
Technical beters:
Type of type power consumption cut b cut b (diameter) speed weight of saw blade
FDJ-120 0.5KW 0.6m3/min three saws:
0 - 30mm
30 - 50mm
50 - 120mm 120mm 60m/min 6kg
FDJ-180 1.0kw 1.2m3/min 180mm 90m/min 10kg
FDJ-230 1.5kw 1.5m3/min 230mm 120m/min 16KG
Primary incision range:
The FDJ-120/220/230 pneumatic cut saw used the downhole pressure pipe system as a power source.
Light weight, easy to take; construction of science, easy to work.
The pipeline, cable, angle steel, structural steel, U type steel, chain, bolt, anchor cable and so on can be cut off quickly.
Super - Han bl steel alloy saw blade, high temperature resistance, long life, the use of conflict.
Widely used in natural gas, coal mine, petrochemical, construction and other professions.
Pneumatic pneumatic cut saw application b:
1. Knowing the material that needs to be cut, it is necessary to reduce the speed of the saw blade by reducing the pressure of the air. Longting District FDJ-120 mine pneumatic cutting saw
2. It is true that the health-care stout has fixed the required cut materials to prevent it from moving.
3. When pneumatic air motor, press the stem with the finger, and then cut it initially.
4, the cutting pressure is controlled by the weight of the saw. This weight is now satisfactory for softer materials. Too much pressure can reduce the speed of the saw blade. For harder materials, the speed of the saw blade can be reduced by pressure.  The incision is to keep the saws straight. Saw any distortion or skew can reduce the use of life. (notice: avoid debris that can fall after a cut. When the cut is about to end, do not make the saw touch your body, the workpiece, or the other people in the neighborhood.
5. When the air motor is closed, the stem is released.
6. Before the next incision, it is necessary to adhere to the movement of the saw blade. The saw blade can't contact any surface when a pneumatic saw. Yanshi city FDJ-120/ mine explosion-proof cutting saw
7. When the air hose is disconnected, the air hose valve is closed. Before disconnecting, open the air valve and decompress the hose.
8. Before replacing the saw, it is necessary to disconnect the air hose and push the stem to release the pressure of Madane.
9, adjust the handle clockwise to release the tension on the sawing guide rod. Then release the lock of the side panel so as to open the side panel. Then remove the blade from the drive wheel and release it from the sawing guide rod.
Note:
All power things may be very risky. Please follow the following safety procedures in order to maintain yourself.
1, wear goggles, gloves, safety boots and protective clothing.
2, time to adhere to the feet of stability, balance. Xuchang city mine / small portable pneumatic cutting saw
3, medical treatment, alcohol or drugs do not operate the things.
4. Before placing the machine, turn off the machine first (closed valve).
5. After the machine stops working, the supply of gas should be cut off immediaby to prevent the machine from launching under the unconsciousness.
6. Do not stand on the ladder or operate on the scaffolding. Please stay away from the operation area.
7, operation to launch a clamp, should first remove the hose. Turn off the main valve.  To release the compressed gas, then turned away from the valve.
8, hold the machine with both hands. Keep the rest of your hands and body away from the open area.
9, the motor must be turned off before transporting the machine and the gas source is cut off.
10, pay attention to the debris that may fall.