XYD-200履带式水井钻机
生产履带式水井钻机、履带式岩心钻机、履带式桩基工程钻机、履带式潜孔钻机。
橡胶履带钻机，该钻机具备以下优点：
1、钻机采用自动伸缩式钻塔（聚龙专利），用两支高强度油缸作支撑，一组液压阀控制钻塔仰卧，操作省时省力，安全可靠，最大限度的为用户创造效益。
2、底盘采用橡胶履带，重量较轻，寿命周期费用较低，能降低车辆行走机构的噪音，减小车体震动、可大幅度降低油耗，可在城市道路行走不伤路面。
3、底盘自带四条高强度螺纹支腿（或液压高支腿）安装调整快捷方便、可用于工作平面调平，装卸车减少吊装成本提高效率，工作时可作为辅助支撑。
4、采用48V电启动柴油机，极大地降低了操作者的劳动强度，特别是寒冷季节，柴油机启动困难时，更显现了极大地优越性。
5、本机配套BW-160独立泥浆泵，泵流量、压力大，维修保养方便，零配件全国各地方便购买。
6、可选型号有XYD-200/XYD-180/XYD-130型。
200型整机参数：
钻孔深度 200m
最大开孔直径 75-300mm
终孔直径 75mm
主动钻杆 53/59*4200mm
钻杆直径 50、60mm
钻孔倾角 90°～75°
配套动力柴油机 15/2200kW/r/min
结构重量/尺寸 1150kg/2700*950*1770
立轴参数
立轴转速 64、128、287、557r/min
立轴行程 450mm
卷扬机参数
单绳提升力 24kN
单绳提升速度 0.12、0.22、0.49、0.95m/s
卷筒直径 140mm
钢丝绳直径 13mm
钢丝绳容量 35m
钻塔参数
额定负荷 5t
有效高度 6m
塔腿规格 89mm
泥浆泵参数
型号 BW145
流量 145L/min
最大压力 2Mpa
往复次数 93次/min
吸水管直径 51mm*4.5m
出水高压管直径 32mm*6m
XYD-200 Water Well Drilling Rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, kinds of hole in concrete structure, river levees, sub-grade grouting hole drilling and direct grouting, Civil wells and earth temperature central air-conditioner etc.

1.53*59 drilling rod adopted, high rigidity and strong delivery torque 

2.The machine is equipped with national patent technology-taper clutch, with characteristics of strong transmission torque, easy operation and free maintenance

3.For the winch, we use large module planetary gear and add supporting frame, greatly increasing hoisting and braking ability of the winch 

4.Vertical spindle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geological conditions

5.We are the first one to equip mud pump with the flow 160L/min in China, so that it will save cost and also make the machine compact, mobile and light weight.
Specification
Unity machine beter
Drill depth 200m
Max open hole diameter φ75-φ300mm
End hole caliber 75mm
Driving drill rod 53/59*4200mm
Drill rod caliber φ50,φ60mm
Drilling angle 90°~75°
Diesel engine 15/2200kW/r/min
Weight/Size 1150kg/2700*950*1770
Spindle
Spindle speed 64,128,287,557r/min
Spindle stroke 450mm
Hoist
Max. single line hoisting capacity 24kN
Single line lifting speed 0.12,0.22,0.49,0.95m/s
Reel caliber φ140mm
Tightrope caliber φ13mm
Tightrope 35m
Mast
Rated Load 5t
Height 6m
Mast Leg diameter 89mm
Mud pump
Model BW160
Displacement 160L/min
Max pressure 1.3Mpa
Reciprocating frequency 165 Times/min
Water inlet caliber φ51mm*4.5m
High pressure tube diameter of water exit φ32mm*6m
φ32mm*6m