产品简介
全自动脱蜡釜
全自动脱蜡釜
产品价格:¥880000
上架日期:2017-05-08 08:46:18
产地:秦皇岛
发货地:秦皇岛
供应数量:不限
最少起订:1台
浏览量:626
资料下载:暂无资料下载
其他下载:暂无相关下载
详细说明

    脱蜡釜,是精铸生产中的型壳脱蜡专用设备。我公司生产的全自动电热(一体)脱蜡釜具有如下特点:

    Dewaxing Autoclave is special designed for removing the wax patterns in the ceramic shell. Our dewaxing autoclave has the following advantages:

     

    ·炉釜一体:采用双层胆结构设计,节省了占地空间,最重要的是这种结构釜体的内胆总是在高温状态下;当高温蒸汽进入内腔时,压力平衡快,减少水滴的产生,脱出的蜡内含水量低。

      Integrated Chambers: Designed as integration with the steam generator and dewaxing chamber to save space. The most important is that the dewaxing chamber is always under a high temperature condition with a short pressure balance time between the double chambers when the high-temperature steam enters into inner side, and also decreasing moisture content in the drained wax.

    ·控制先进:采用PLC程序控制,保证温度、压力、水位、充气、保压、排气及操作门等逻辑连锁控制,实现除开关操作门及取放物料外的全自动控制。自动上水、停水,高低水位采用自动声光报警,无触点加热,可加热能回收装置以节约能源。

    Advanced Control: With PLC control system to ensure the logical interlock of temperature, pressure, water level, steam in, dwell, steam out and door operation can be controlled automatically except closing/opening door and placing in/out shell clusters. And also features with water feeding and stopping automatically, a sound-light alarm for the high-low water level and contactless heating. Heat recovering unit can be supplied for saving energy with additional cost.

    ·安全性好:确保满足压力容器使用的一切安全规程。温度安全控制,压力安全控制,安全阀保护,关门不到位不能送气,釜内有压打不开门,内胆排气阀打开时外胆向内胆不能充气,釜门有余压保护等七种安全保护。操作门前装有明显的安全操作警示牌。

      Good Safety Perbbbbance: This machine complies with all the safety regulations of pressure vessel. It features with seven safeguards including temperature safety control, pressure safety control, safety valve protection, no steam delivering without door-closing in place, the door is unable to open if there is any residual pressure in the chamber, no steam in when the inner air release valve opens, residual pressure protection of autoclave door. There is an obvious safety warning board in front of the operating door.

    ·配置高档:关键的控制元件均采用合资产品或进口产品,关键的阀为英国进口阀门。

      High-grade Configuration: The key control components are all imported products or supplied by joint venture. And the key valve is imported from UK.

    ·节能环保:釜体外壳采用新型保温材料,导热系数低,隔热效果好,降低了燃料消耗,属节能环保型设备。

     Energy saving and environment friendly: The outside cover of autoclave is made of new thermal insulation material with a lower heat-contacting coefficient, good thermal barrier effect and decreasing the fuel consumption.

    ·外形美观:我公司在设备的设计上,除了注重内在质量外,还特别注重外观设计和表面处理,真正做到了工艺合理、技术先进、造型美观、色彩流畅。

    Attractive Appearance: Besides the quality, we also pay special attention to the appearance design and surface treatment for our machines with the characters of reasonable process, advanced technology, beautiful appearance and fluent colors.

     

    基本参数

    Specification

    型号

    Model

    YT-DRTF800

    YT-DRTF1000

    YT-DRTF1200

    YT-DRTF1400

    YT-DRTF1600

    YT-DRTF1800

    内胆尺寸

    Inside dimension

    Φ800×1200mm

    Φ1000×1200mm

    Φ1200×1400mm

    Φ1400×1600mm

    Φ1400×1800mm

    Φ1600×1600mm

    Φ1600×1800mm

    Φ1800×1600mm

    Φ1800×1800mm

    内胆材料

    Inside material

    碳钢/不锈钢304/316L

    Carbon steel or SS304/316L

    碳钢/不锈钢304/316L

    Carbon steel or SS304/316L

    碳钢/不锈钢304/316L

    Carbon steel or SS304/316L

    碳钢/不锈钢304/316L

    Carbon steel or SS304/316L

    碳钢/不锈钢304/316L

    Carbon steel or SS304/316L

    碳钢/不锈钢304/316L

    Carbon steel or SS304/316L

    使用温度

    Working temperature

    174

    174

    174

    174

    174

    174

    设计压力

    Design pressure

    1.0 MPa

    1.0 MPa

    1.2 MPa

    1.0 MPa

    1.0 MPa

    1.0 MPa

    保压时间

    Dwell time

    060min(可调)

    (adjustable)

    060min(可调)

    (adjustable)

    060min(可调)

    (adjustable)

    060min(可调)

    (adjustable)

    060min(可调)

    (adjustable)

    060min(可调)

    (adjustable)

    注:可根据客户要求设计

    Note: We can design the special machines according to the customer’s requirements.

在线询盘/留言
  • 免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,本网对此不承担任何保证责任。我们原则 上建议您选择本网高级会员或VIP会员。
    企业信息
    秦皇岛市宇田精铸设备股份有限公司
    会员级别:
    ------------ 联系方式 ------------
    联系人:女士()
    联系电话:0335-8015998
    联系手机:18003350935
    传真号码:0335-8581956
    企业邮箱:yutianco@163.com
    网址:yutianice.jdzj.com
    邮编:66004
    推荐供应
    0571-87774297