帆布芯、尼龙芯胶带的硫化胶接，是将胶带接头部的胶层和芯层按一定的形式和角度，剖剥成阶梯，涂以胶浆使其粘合。然后在一定的压力、温度和时间条件下，经过硫化反应， 上覆盖胶下覆盖胶边胶条边胶条抗拉体（骨架层）把接头部胶粘在一起，使接头获得最佳的粘着强度。

胶带硫化机驱动滚筒与改向滚筒的调整是皮带跑偏调整的重要环节。因为一条胶带硫化机至少有2到5个滚筒，所有滚筒的安装位置必须垂直于胶带硫化机长度方向的中心线，若偏斜过大必然发生跑偏。其调整方法是与调整托辊组类似。对于了头部滚筒如皮带向滚筒的右侧跑偏，则是右侧的轴承座应当向前移动，皮带向了滚筒的左侧跑偏，则左侧的轴承座应当向前移动，相对应的也是可将左侧轴承座后移或右侧轴承座后移。尾部滚筒的调整方法是与头部滚筒刚好相反。经过反复调整直到皮带调到较理想的位置。在调整驱动或改向滚筒前最好准确安装其位置.详情访问(www.wxxwks.com)

he adjustment of the driving roller and the adjusting roller of belt vulcanizing machine is an important part of belt deviation adjustment. Because there are at least 2 to 5 rollers of a belt vulcanizing machine, the installation b of all the rollers must be perpendicular to the centerline of the length of the belt vulcanizing machine. The adjusting b is similar to that of adjusting roller group. For the head drum such as belt to the right deviation of the roller bearing seat is on the right side of the belt shall move forward, to the drum of the left deviation, then the left bearing seat shall move forward, the corresponding also can be left bearing seat back or right bearing seat back. The tail roller adjustment b is the same with the head drum. After repeated adjustment until the belt to a better b. It is best to install the b accuraby before driving or changing the cylinder